Wired Network Working into Wireless Access Point
Image : http://www.flickr.com
Let's dive into something more complicated. What if you already have a wired network, and you are completely satisfied with the manner in which it leads – you see no point in dismantling it, and the wireless when it works fine as is. They have this notebook, but again, who really want to use wirelessly. Basically, what you want to do is to connect to a wired network. This is often defined as a network bridge.
Fortunately, there is avery simple way to do exactly what you want. It's called a wireless access point.
Partly Wireless
If you have lots of computers (on a corporate network, for example), and you can not switch to it is on all wireless networks at once, installing a wireless router is a good way to do it bit-by -bit. Once the router is part of the network, you can simply remove a network cable to the day or week, and replaced it with a wireless connection.
HardwareSoftware Requirements
There are two types of wireless access points: software and hardware. Wireless access point software runs on a computer on the network wired and wireless devices can connect to the network on this computer (the computer seems to be wireless ready).
You can get wireless access software easily – while a web search will give you lots of options. Finding one that is open source, as you Download it now is free and without violating the laws. Unfortunately, wireless devices will be connected to the network when the computer is on and connected.
Hardware access points, on the other hand, are stand-alone devices that are connected to the network from anywhere – you can do either a single point of access, or convert an old computer as an act and nothing else. You connect to Wired> Network that just like a regular computer, unless they provide access to the network to a wireless receiver within range.
You can leave hardware access points connected to the network and turned on all the time, if you want. An advantage of dedicated devices is that generally had longer range, which allows wireless devices further away from the access point than you could with an access point software. Dedicated devices can be expensive,if – the prices are more or less similar to the wireless router.
As Wireless Access Points Work
An access point sends requests for data on behalf of wireless devices connected to it. In this way, functions as a wireless router: basically, a wireless access point with a wired LAN as a wireless router is connected to the Internet. The difference is that the devices do not actually connected to a different part of the LAN access point – other computers on the LANbetween computers and wired and wireless.
This is great because it gives you the ability to dynamically extend your wired LAN, without wires. In theory it should not be all that can currently be done through the wired network are not able to use the wireless extension.
Configuring a Wireless Access Point
You can usually configure a wireless access point is as simple as connecting a network connection through the cableshould be included. The network should see the access point and to give him a network (IP) automatically. If you do more on configuring the access point – for example, has enabled wireless encryption – then you must open the settings of the access point.
You can do this by going to the router's IP address in the browser. If you are not sure how to do this, see your access point manual (perhaps better luck reading the online version are,later with the problems of the people) are having updated. Playing with the settings of the access point, you can pay (DHCP network dynamic addressing only) giving your access point, a static address instead. This helps to stabilize the cable network.
Computer-network 