USB to Ethernet Converter: Tapping the network more easily
Image : http://www.flickr.com
Both LAN and Internet use, many people rely on USB to Ethernet converter cables for a fast, reliable connection. These dedicated adapters are responsible for transmitting data between two or more computers in a given system. For computers that are grouped in a local network, these wires serve as their lifelines.
In the dictionary techie, USB and Ethernet are described as two distinct components with functions quite independent. USBstands for Universal Serial Bus, which is the outer channel of data that supports Plug and Play. This device is plugged into an outlet that has been specially designed for this bus and you can actually run up to 127 devices with a single door. On the other hand, is simply an Ethernet computer networking technology that makes use of both an Ethernet card or cable.
Due to different specifications of the computer, the USB function was complemented byEthernet network and to establish Internet connections. There are cases where a unit of the computer has an Ethernet port, making it impossible to connect. However, through the use of USB to Ethernet, the connection is immediately established, not only, but also ensures quick and consistent.
The USB to Ethernet adapter cable is of great advantage for those who use laptops, PCs as well as loyalists who may have difficulty in finding the slot forthe Ethernet card on the motherboard. What adds to the convenience is the fact that installs easily, thanks to the USB plug and play. All you have to do is find a USB adapter and leave it running and prompt message indicating the installation process.
In addition to the smooth transfer of Internet data, multiplayer gaming and file sharing between multiple computers are among the many things that can be enjoyed while using the adapter. Being in ashared network, you can access printers and other devices that are connected to the system.
In order for the adapter cable to work properly on your system, its ends must be in the right slot. After starting the computer, connect the flat end of the adapter into an available USB port. Now you have the other end to be connected to the Ethernet cable, which in turn must be connected to the modem or hub that allows network and the Internetconnection. You can easily detect if the assembly had been correct once the light is lit on the adapter body.
The compatibility of operating systems (OS) is still an important consideration for the purchase of right Converter USB to Ethernet computer network. In the past, only for Windows can handle these adapters with ease. Today, different types of Ethernet-capable adapters have dominated the market, which are now made compatible with other operating systems like Mac and Linux.Apart from this, there are also those "two-way" adapters that are able to convert the Ethernet network in different channels. These portable devices are very useful, especially in places where the wireless connection is not available.
Bandwidth, DS3, SONET or Ethernet Business – How to decide the best option for a computer network
Image : http://www.flickr.com
When deciding what technology to be adopted for the net assets of each computer must have a basic understanding of that process of thought. The truth is that there are advantages and disadvantages of each option. Choosing the right one can be tricky. Then you must consider several factors before making a final decision.
You first need to thoroughly assess the existing network. Discover and resolve any bottlenecks that might exist internally is essential beforepotentially spending thousands of dollars on a new technology solution. You should start with the creation of several data models and using a network analyzer to get a handle on your network usage. It 's a good idea to use an application to the modeling of the network to provide a more complete model network. This approach provides a more accurate assessment of network performance and where there may be problems that need attention, if any.
Next, youneed to identify the requirements of bandwidth. The application (s) used on the network at the time, and planned for the future is the most important measure when it comes to determining the bandwidth. Let me repeat that …. is essential to consider both the future of network applications and current. For example, if e-mail is the only application, an ISDN line should meet your bandwidth needs. Depending on the number of users you could probably get by with just a T1 lineor perhaps a fractional T1 too. However, if there is a need to pump data, voice and video over the network, with guaranteed delivery, bandwidth DS3 or SONET (eg OC3 bandwidth) is the best solution. If available, Business Ethernet is a viable solution for this case. If you're just trying to speed up Internet access, leased lines account sized to the number of users and the saturation of the points provided.
The decision for the requirements of bandwidth also depends onthe network topology and the number of sites to be interconnected. For example, if the WAN (Wide Area Network) topology is designed to connect multiple locations, consider MPLS. MPLS (Multi-Protocol Label Switching) allows you to connect multiple sites quickly and efficiently. However, for a point-point leased lines may be the best solution. Note that T-1 price (as well as DS3) is based on the distance. The longer the distance between the twosites, the higher the cost. The lesson I learned here is to be sure to evaluate all options before investing in leased lines.
It is also important to establish a realistic timetable for deployment. Do you need more bandwidth today, or you can wait for future technologies to emerge? There is a gradual installation to make sense solutions with fractional or burstable implemented for an initial backbone …. with the expansion later? These are some options to consider to make sure we have whatyou need … when you need it.
Finally, consider the cost. Get access to ATM (DS3 for example) or SONET (eg, OC-3) networks can be expensive, and the material can be even more expensive. Solutions like the T-1 and DS-3 can carry large initial costs of installation and equipment, along with higher monthly costs. Note that I said may. Today the costs are coming down across the board ….. so depending on location and provider, you can find a great deal of free material and lower than usualcircuit prices. Note also that the Business Ethernet is less expensive than an equivalent DS3 and certainly less expensive than an OC-3. As long as the area of the planned installation location is already lit fiber.
Overall, you currently have a variety of technologies available to offer a plethora of WAN connectivity options. As the future unfolds we should expect to see a further increase both the availability and variety of technologies, innovations moreoccur …. and price adjusted accordingly. If you follow the above guidelines for the decision of the network, it is likely that the company should see more bandwidth for fewer dollars. To help navigate the process and ensure that you get exactly what you need at the lowest price …. I suggest using the free service available through Network Solutions.
Computer-network 